Z Microsystems 8X Manual do Utilizador descarregar pdf (Página 11)

Doc# 27-0030UM Rev 1.0 Issued 12/04

11

Slide the unit in until the slide action stops.

Hold the 8X RAID up to the extended

rails with the rear of the 8X RAID to the

rear of the rack. Insert the inner member

(attached to the 8X RAID) into the middle

member of the slide.

CAUTION: When attaching the inner

members of the slide assemblies

to the sides of the 8X RAID,

ensure screw penetration

does not exceed 3/16” length.

Damage may result if screw

length exceeds 3/16” length.

Use 10-32 x 3/16” screws only

(part# 01-91827).

STEP 2: 8X RAID INSTALLATION

Secure the front of the 8X RAID to the rack

with three 8-32 x .75” panhead Phillips

screws on each side. See image above.

Simultaneously press the slide locking tab

in and push the unit all the way back into

the rack.

INSTALLATION

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 50 51

Comentários a estes Manuais

Sem comentários